Forney UniFlame II Bedienungsanleitung PDF herunterladen (Seite 2)

12 PIN

ELECTRICAL

CONNECTOR

8 PIN

ELECTRICAL

CONNECTOR

MOUNTING

FLANGE

12.57

319.2

75°

PURGE AIR CONNECTION

3/8 NPT OR 3/8 BSP

LOCKING RING

DISPLAY CAP ASSY

5.75

146

5.06

128.4

1"NPT OR

1" BSP SIGHT PIPE

CONNECTION

1 23/32 HEX

[43.7]

UniFlame

II Unitized Flame Detector

Products and Accessories:

UniFlame

II Part #401116-01 (display not included)

UniFlame

II CEX (with VFD Display) Part #401117-01

UniFlame

II CEX with blank cap - NO Display Part #401117-02

UniFlame

II CEX Wireless (with IR transmitter) Part #401118-01

UniFlame

II without connectors (internal terminal blocks) Part #401116-11 (display not included)

UniFlame

II for UniFlame I retroﬁ t (1-12 pin quick disconnect connector) Part #401116-10 (display not included)

Alphanumeric (VFD) Display with ﬁ ve push-button keys Part #401116-03

Infrared Transmitter Part #401118-03 requires Hand-Held Communications tool Part #401118-04

Blank Cap - No Display option Part #401116-05

FEX Software Part #401116-04

Swivel Mount Part #91016-63

Mounting Flange 1” NPT Part #401116-50 1” BSP Part #401116-60

Cable 8 conductor Quick Connect Part #401119-xx Bulk Cable Part #401119-00

Cable 12 conductor Quick Connect Part #401120-xx Bulk Cable Part #401120-00

Conversion Box for UniFlame I to UniFlame II Part #92527-03

Wiring Harness Part #92527-04

UniFlame II Cooling Chamber Standard Version Part #92527-01 CEX version Part #92527-02

Electrical Speciﬁ cations:

Input Power: 24 Vdc, +10%, -15% supply current 0.35 A,

8.5 VA

Electrical Connection: 8-pin and 12-pin screw type quick disconnect

(non-CEX).

“CEX” models have internal terminal blocks

Relay Output: 2 FLAME RELAYS, SPDT (N.O. and N.C.)

FAULT RELAY, SPST (N.O.)

Contact Rating: Minimum: 10mA @ 5 Vdc

Maximum: 100 mA @ 30 Vdc, 100 mA @ 50

Va c

Analog Output: Two, 4-20 mA dc current, referenced to 24 Vdc

common, maximum connected load: 750 ohms

Operator Interface: Requires one of two interfaces:

• Alphanumeric Display with ﬁ ve pushbut-

ton keys.

• Infrared Transmitter used in conjunction

with hand-held communications tool

Cable Speciﬁ cation: Multi-core, 8 and 12 conductor (color coded),

18- AWG, with foil wrap and overall braided

shield and drain wire. PLTC-ER rating. Maxi-

mum cable length 1000 feet (305 meters)

Cable Jacket: PVC / black (ﬂ ame-retardant,

RoHS compliant)

Temperature Rating: -40 F to +221 F (-40 C to

+105 C)

8 conductor: Nominal O.D. 0.44” (11.2 mm),

maximum O.D. 0.48” (12.2mm)

12 conductor: Nominal O.D. 0.52” (13.2 mm),

maximum O.D. 0.56” (14.2mm)

Maximum cable length 1000 feet (305 meters)

Mechanical Speciﬁ cations:

Housing Material: Cast aluminum with gray polyester powder coat

ﬁ nish

Housing Weight: 5.9 lbs (2.69kg), 7.1 lbs (3.22kg) CEX models,

ﬂ ange additional

Environmental: NEMA 4X, IP66

Area Classiﬁ cation: Standard: Class I Div 2, Groups A, B, C, D,

Class II Div 2, Groups F & G

CEX Version: Ex d IIC T6

Mounting: Requires one of two threaded mounting ﬂ anges,

ordered separately

• 1”NPT female pipe mount with 3/8” NPT

female cooling air connection

• 1”BSP female pipe mount with 3/8” BSP

female cooling air connection.

Both ﬂ anges contain an integral heat insulating

female thread insert (heat insulating nipple not

required).

Mounting Flange Weight: 0.62 lbs (0.28kg)

Cooling / Purge Air

Requirements:

Clean, dry, cool; 4 SCFM (113 l/min) at 3/8”

threaded mounting ﬂ ange, or 1 inch “Y” ﬁ tting,

mounted on detector sight pipe. Temperature

near the upper limit of the detector operating

range and/or use with dirty/dusty fuels may

require up to 15 SCFM (425 l/min).

Temperature Rating: -40° to +150°F (-40°C to +65°C)

Humidity: 0% to 95% relative humidity, noncondensing

Agency Approvals:

, FM, ATEX, DIN-DVGW, DIN-CERTO,

CE, AGA, ABS, INMETRO UL-BR

(not all approvals apply to all models)

Pub # 404005-24

Rev 04/2012

Forney Corporation • 3405 Wiley Post Road • Carrollton, TX 75006 • 800-356-7740 • Fax 972-458-6650 • www.forneycorp.com

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Forney UniFlame II Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Forney UniFlame II